Setting Up an IPv6 Connection to a Service
To connect to a service (Linux VDS, Windows VDS), your internet provider must support IPv6 addressing.
If your provider does not support IPv6, you can use a third-party service to run IPv6 over IPv4.
What is IPv4?
IPv4 is the fourth version of IP, which defines the rules for how computer networks operate based on packet exchange. It identifies devices connected to a network through an addressing system. When a device accesses the internet, it is assigned a unique numeric IP address, such as 192.149.252.76.
IPv4 uses a 32-bit address scheme, allowing 2^32 addresses (about 4.29 billion). The growing number of internet users is exhausting IPv4 addresses, which is why IPv6 is being developed.
What is IPv6?
IPv6 (Internet Protocol Version 6) was developed to solve the shortage of IP addresses. It is a 128-bit addressing system that supports 2^128 addresses.
Example of an IPv6 address: 3ffe:1900:fe21:4545:0000:0000:0000:0000
IPv4 and IPv6 are both used to identify devices on a network, but they differ in structure and capabilities.
You may come across various technologies: 6to4, IPv6 tunnel, Tunnel Broker.
This guide uses a proven method — the Tunnelbroker service by Hurricane Electric.
Requirements before setup
- an understanding of TCP/IP principles
- a router with IPv6 support
- a static IPv4 address
- patience
Go to the website:
https://tunnelbroker.net/
Sign up by clicking the Register button:
Fill in the registration details and accept the terms of service:
After registering, log in and create a new tunnel:
Enter your static IPv4 address in the IPv4 Endpoint field.
Select a server and click Create tunnel:
Once it is created, select the tunnel:
You will need the following parameters:
- Server IPv4 Address
- Client IPv6 Address
- Routed /48
Enter this data in your router settings:
Save the settings and restart the router.
Checking IPv6
You can check the connection at:
https://test-ipv6.com/
Or from the command line:
ping ipv6.google.com
Example of a successful response:
Pinging ipv6.l.google.com [2a00:1450:401b:801::200e]
Reply from 2a00:1450:401b:801::200e: time=24ms
You can now use IPv6 to connect to services.








